FAR RTG925EB G Manuel D'instructions page 50

• Test
Clean the parts of the refrigerator with lukewarm an
water on a soft cloth or with a neutral detergent
and clear water, then wipe them dry.
Notes : Electrical parts of the refrigerator can only
be wiped with a dry cloth.
Turn the thermostat knob on the "3" position
turn on electricity. The compressor begins
work.
If the temperature in the fridge drops significantly,
this indicates that the refrigeration system is
operating correctly. When the refrigerator has been
running for some time, the temperature will adjust
to the setting you've made if the door is not opened
frequently.
If the above steps are successful, the trial operation
is complete.The refrigerator will work normally.
• Temperature control
The refrigerator is controlled by a temperature control
knob located inside, in the upper right-hand corner.
Adjust the control knob to your preferred setting.
0=off setting
1=cold setting
7=coldest setting
ENGLISH
and
to
GB-15