Reversing The Door; Tools You Will Need - Far R2621Wdw Manuel D'utilisation

ENGLISH

REVERSING THE DOOR

The side at which the door opens can be
changed, from the right side (as supplied) to the
left side, if required.
Warning! When reversing the door, the
appliance must not be connected to the mains.
Ensure that the plug is removed from the mains
socket.

Tools you will need

8mm socket Thin-blade
wrench screwdriver
Cross-shaped Monkey
screwdriver wrench
Additional parts (in the plastic bag)
Left Hinge Cover
Note: If required you may lay the refrigerator on
its back in order to gain access to the base, you
should rest it on soft foam packaging or similar
material to avoid damaging the backboard of the
GB-32
Putty knife
8mm wrench
refrigerator. To reverse the door, the following
steps are generally recommended.
1. Stand the refrigerator upright. Open the upper
door to take out all door racks and tank(to avoid
damage) and then close the door.
Water racks
2. Use a putty knife or thin-blade screwdriver to
prize the screw hole cover which is at the top
left corner of the refrigerator, and the upper
hinge cover which is at the top right corner
of the refrigerator.
screw hole cover
3. Unscrew the special flange self-tapping
screws which are used for fixing the right
upper hinge part by a 8mm socket driver or a
spanner (please support the upper door with
ENGLISH
Door racks
upper hinge
cover (right)
GB-33