Publicité
You also can call customer service for reversal instructions if it is necessary.
Door Lock
Your unit is provided with a lock and key combination.
The keys are located inside the plastic bag that contains the User's Guide. Insert the key
into the lock and turn it counterclockwise to unlock the door. To lock the door, do the reverse
operation making sure metal pin is engaged completely. Remove the key and place it in a
secure place for safekeeping.
Temperature alarm
If the temperature is abnormally high, the display will show the error code "HH", if the
temperature is abnormally low the display will show the code "LL".
5. USE INSTRUCTIONS
It is recommended to install your device in a place where the ambient temperature is between 16 -
43°C. If the ambient temperature is above or below the recommended temperature, the performance
of the unit may be affected and it may not be possible to obtain a temperature between 5 - 20 °C.
The above temperatures may fluctuate depending on whether or not the interior bulb is ON or OFF or
whether the bottles are located on the upper/middle or lower section.
(Upper control panel)
RUN light: indicator light of compressor working. While the compressor operating, the red
light is on. While it stops operating, the red light is off.
SET button: temperature setting button; Once you press the button, the temperature
increases 1℃ or 1℉. Setting range is between 5℃~20℃ (41℉~68℉).
(Middle and lower control panel)
RUN light: indicator light of compressor working. While the compressor operating, the red
light is on. While it stops operating, the red light is off.
UPPER CHAMBER: display of the actual temperature of the upper chamber.
LOWER CHAMBER: display of the actual temperature of the lower chamber.
33
Publicité
