Publicité
Handle installation
This wine cooler includes a stainless-steel handle that is required to operate this unit.
To install the handle please follow the below instruction:
Pull away the door gasket in the area where the handle is to be installed – you can
see two designated holes for handle installation. The gasket is easily displaced by
hand, no tools are necessary.
Install the handle tightly as shown below with the two screws. Lock washers and flat
washers provided. (DO NOT over tighten as this will cause damage to the handle
assembly and stainless-steel surface of glass door).
Replace the door gasket to its original position.
Reversing the door swing of your appliance
The unit is delivered to you with the door opening from the left side (hinge on right side). The
door of this appliance is capable of opening from either the left or right side. To reverse the
door swing of your cooler and open from the right side, please follow the instructions and
diagram as follows.
31
Publicité
