Publicité
cleaner, ethereal oils, organic solvents or abrasive cleansers
Do not use sharp objects to remove frost from the appliance.
•
Use a plastic scraper.
Installation Important!
For electrical connection carefully, follow the instructions
•
given in this manual.
Unpack the appliance and check if there are damages on it.
•
Do not connect the appliance if it is damaged. Report
possible damages immediately to the place you bought it. In
this case retain packing.
It is advisable to wait at least 24 hours before connecting the
•
appliance to allow the oil to flow back in the compressor.
Adequate air circulation should be around the appliance,
•
lacking this leads to overheating. To achieve sufficient
ventilation, follow the instructions relevant to installation.
Wherever possible the back of the product should not be too
•
close to a wall to avoid touching or catching warm parts
(compressor, condenser) to prevent the risk of a fire, follow
the instructions relevant to installation.
The appliance must not be locate close to radiators or
•
cookers.
Make sure that the mains plug is accessible after the
•
installation of the appliance.
When positioning the appliance, ensure the supply cord is
•
not trapped or damaged.
Service
Any electrical work required to do the servicing of the
•
appliance should be carried out by qualified electrician or
competent person.
This product must be serviced by an authorized Service
•
Center, and only genuine spare parts must be used
26
.
Publicité
