Scope Of Supply - Magontec Correx UP 2.3-919 Notice D'utilisation

mitted as actual voltage to the potentiostat where the actual voltage is com-
pared to the reference voltage defined by the potentiostat. The protective cur-
rent supplied is then adjusted in such a way that the actual tank potential cor-
responds to the reference potential.
6

Scope of supply

6.1 CORREX UP 2.3-919 scope of supply for sleeve mounting
®
Check by comparison with the table below and the illustration in chapter 1.2
that the parts and components supplied are complete and intact before instal-
ling them.
Item Number
1 1
2 1
3 1
4 1
6.2 CORREX UP 2.3-919 scope of supply for insulated hole mounting
®
Check by comparison with the table below and the illustration in chapter 11.2
that the parts and components supplied are complete and intact before instal-
ling them.
Item Number
1 1
2 1
3 1
4 1
1
1
1
2
1
5 1
Description
Plug-in potentiostat with pilot lamp
Titanium anode with insulated screw fitting set
Connecting cable with connectors
Operating Instructions
Description
Titanium anode with thread bolt and sealing disc
Plug-in potentiostat with pilot lamp
Connecting cable with connectors
Small bag containing:
Seal (Viton)
Diode board
Insulation sleeve M8x2
Hex nuts M8, galvanized
Tooth lock washer with tab connector 6.3 x 0.8 mm
Operating Instructions
Operating Instructions CORREX UP 2.3-919
®
29