Important Information Concerning The Use Of The Present Operating Instructions; Scope Of Application; Technical Changes - Magontec Correx UP 2.3-919 Notice D'utilisation

Operating Instructions CORREX
2. Important information concerning the use of the present
operating Instructions
Read this information before reading the Operating Instructions.

2.1 Scope of application

The present fitting and operating Instructions is applicable to the impressed-
current anode system CORREX
shown in the Annex.
The manual covers the following mountings:
Sleeve mounting
with screw G 3/4"
with screw G 1"
with screw G 1 1/4"
with screw 3/4"x14NPT
Insulated-hole mounting
ith M8 thread bolt for 10.5 mm fitting bore
2.2 Anode types to be used
The impressed-current anode system CORREX
different types of anodes. Information about which type of anode is suited to
which type of hot-water tank can be obtained from the storage tank manufac-
turers who will also provide information on the length and the number of ano-
des that can be installed in the storage tank. This is particularly important if
older storage tanks are to be retrofitted with anodes. The corresponding spe-
cifications of the storage tank manufacturer must be respected.
2.3 Fitting principle
All fitting instructions and sketches only show the fitting principle in schematic
form. Install CORREX
what is shown on the schematic drawings or to what can be unambiguously
inferred from them.
Do not install CORREX
2.4

Technical changes

The shapes and forms of the individual components can be changed at any
time without prior notice, especially if such changes are owed to technical
improvement or if so requested by the customer.
26
UP 2.3-919
®
UP 2.3-919 including the components
®
UP only if the actual fitting conditions correspond to
®
UP anodes if this is not the case.
®
UP 2.3-919 is available with
®