Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
SAFETY INFORMATION
SPECIFIC SAFETY RULES FOR YARD CHIPPERS
• Be thoroughly familiar with the operation of the chipper before initial use.
• NEVER put your hands into the hopper. Always use the push stick supplied with your chipper to
push items into the hopper.
• DO NOT try to force objects that exceed the recommended diameter and capacity of the chipper:
1-1/2" (38 mm).
• AVOID ACCIDENTAL START-UPS. Be sure switch is OFF when plugging in.
• DO NOT FORCE THE CHIPPER. It will do the job better and with less likelihood of injury at the
rate for which it was designed.
• Before putting objects into the hopper, remove any stones, debris, or objects that could damage
the blades.
• During operation, ensure that there are no other persons or animals within a radius of 50 feet.
Stop using the machine while people, especially children, or pets, are nearby.
• NEVER reach under the chipper until it has completely stopped. The blade may continue to rotate
for a time after being switched OFF.
• MAKE all adjustments with the power OFF and the chipper disconnected from the power source.
• ALWAYS use accessories provided or recommended by the manufacturer. Do not use substitutes.
• KEEP guards in place and in working order. Keep blades sharp. Keep hands and feet away from
cutting areas.
WARNING
NEVER PLACE HANDS NEAR DISCHARGE CHUTE. FAILURE COULD RESULT IN SERIOUS
INJURY.
WARNING
NEVER REACH INTO THE HOPPER UNTIL THE CHIPPER HAS COME TO A COMPLETE STOP
AND IS UNPLUGGED. THE CHIPPER WILL CONTINUE TO ROTATE FOR A FEW SECONDS
AFTER IT IS SWITCHED OFF
5
Publicité
Table des Matières
