Yamaha A-S3200 Mode D'emploi page 11

7 8
A
9
PRE OUT jacks
Note
• Audio signals output at the PRE OUT jacks are the same
channel signals that are output at the SPEAKERS L/R CH
terminals.
• The following parameter settings are effective for audio
signals output at the PRE OUT jacks.
- BASS
- TREBLE
- BALANCE
- VOLUME
0
MAIN IN jacks
Connect external components that feature a volume
control function so that you can use this unit as a
power amplifier.
NOTICE
If you select MAIN DIRECT as the input source for this
unit, the volume level will be fixed. In this case, to adjust
the volume level, use the volume control on the
external amplifier connected to the MAIN IN jacks.
9 0
A
SPEAKERS L/R CH terminals
B
SERVICE jack
This jack is used to test the product.
C
REMOTE IN/OUT jacks
Connect external components that support the remote
function. (➔ page 21)
D
TRIGGER IN jack
Connect external components that support the trigger
function. (➔ page 20)
E
AC IN jack
Connect the supplied power cable here. (➔ page 22)
11