Installation Instruction - Vevor Y02034 Mode D'emploi

1. Slip kick leg bottom
into the hole of the axle.
4. Swivel the hull pad
into the hook.
7. Clip up the locking
mechanism and push it
down till it clicks into the
lock position.

INSTALLATION INSTRUCTION

2. Install the axle this
way.
5. Repeat the action for
the other hull pad.
8. Repeat the same on
the other side to install
the other wheel.
3. Compress both axle
on this side to lock and
tighten the two axles.
6. Straight end of the
axle ,and insert the wheel
onto the axle.
9. Load your kayak and
tight it well with the straps.