Commissioning, Operation - WIKA IV10 Mode D'emploi

5. Commissioning, operation

5. Commissioning, operation
Personnel: Skilled personnel
Tools and mounting material:
EN
Torque spanner set, open-ended spanner set (17 ... 32 mm)
■
Allen key set
■
Screwdriver
■
Suitable lubricants for sealing elements and bolts
■
Suitable sealing material for threaded connections
■
Before installation, commissioning and operation, ensure that the appro-
priate product has been selected in terms of operating conditions, design
and specific measuring conditions.
Only use original parts.
Always observe the mounting and operating instructions of accessories
when commissioning them.
WARNING!
Physical injuries and damage to property and the
environment caused by hazardous media
Upon contact with hazardous media (e.g. with flammable
or toxic substances), harmful media (e.g. corrosive, toxic,
carcinogenic, radioactive), and also with refrigeration plants
and compressors, there is a danger of physical injuries and
damage to property and the environment.
Aggressive media with extremely high temperature and under
high pressure may be present at the product.
▶
▶
12
For these media, in addition to all standard regulations,
the appropriate existing codes or regulations must also be
followed.
Wear the requisite protective equipment (see chapter 3.6
"Personal protective equipment").
WIKA operating instructions, shut-off valves and valve manifolds