WIKA IV10 Mode D'emploi page 13

5. Commissioning, operation
WARNING!
Physical injuries and damage to property and the
environment caused by media escaping under high
pressure
With the pressurisation of the product, as a result of poor
sealing of the connections, media under high pressure can
escape.
Due to the high energy of the media that can escape in
the event of a failure, the possibility of physical injuries and
damage to property exists.
▶
The sealing of the connections must be carried out expertly
and checked for leak tightness.
WARNING!
Physical injuries and damage to property and the
environment caused by improper handling.
Incorrect opening or closing of a valve can lead to the
escape of media.
▶
The operator must be aware of the consequences prior to
changing the state to a specific valve position.
5.1 Mounting
When unpacking, check all components for any external damage.
■
If a return is needed, please follow the instructions given in chapter
8.2 "Return".
Ensure that all unused connections are closed. Plug screws for vent
■
connections are included in delivery, though not pre-fitted.
The valve may only be carried by the valve body, not by the handle
■
Check the product marking for correctness (see chapter 3.7 "Label-
■
ling, safety marks").
Before mounting, ensure that the process line has been depressu-
■
rised using the main valve.
Mount the measuring instrument at the right connection. Ensure that
■
the flow direction arrow points from the process connection towards
the measuring instrument.
WIKA operating instructions, shut-off valves and valve manifolds
EN
13