Commissioning, Operation - WIKA PG43SA-S Mode D'emploi

4. Transport, ... / 5. Commissioning, operation
CAUTION!
Damage to the diaphragm during unpacking
With improper unpacking, a high level of damage to
property can occur.
Avoid touching the diaphragm after removing the
diaphragm protection. Impermissible mechanical loading
(e.g. pressing the diaphragm) can result in measuring
deviations or even in the complete failure of the measur-
ing instrument.
The PG43SA-C is optionally packed under sterile
conditions, and on the perforation on the rear of the
sterile packaging there is a brown-coloured process
indicator. By checking this brown colouration you can
find out whether the gauge has been packed under
sterile conditions.
Store instruments that are packed under sterile
conditions in the instrument package (no condensation
allowed, storing possible for 6 months).
Permissible conditions at the place of storage
Storage temperature: -30 ... +70 °C
Protect the instrument from dust.

5. Commissioning, operation

5.1 Mounting preparation
To protect the pressure gauge from mechanical damage keep it in
„
the outer carton until installation.
The gauge should only be removed form the sterile packaging
„
shortly before mounting at the measuring point.
WIKA operating instructions pressure gauge, PG43SA-S, PG43SA-C
EN
9