Saving Memory Settings; Programmes; Setting A Programme; Starting The Memory - Constructa Cc4P91260 Notice D'utilisation

BMemory
T he memory function allows you to save the setting for
M e m o r y
a dish and call it up at any time.
The memory function is useful if you prepare one dish
particularly frequently.

Saving memory settings

Example: 360 W, 25 minutes
Touch the field.
i
1.
The indicator lamp above the field will light up.
Touch the microwave power setting you require.
2.
The indicator lamp above the field will light up and
1:00 min will appear in the display.
Set the cooking time on the settings area.
3.
Touch the field to confirm.
i
4.
The clock will reappear. The setting has been saved.
Notes
You cannot save several microwave power settings
■
one after the other.
You cannot save automatic programmes.
■
You can save the memory settings and start the
■
appliance immediately. Do not touch
touch the field instead.
I
To create a new memory setting: Touch the
■
The old settings will appear. Save the new
programme as described in steps 1 to 4.

Starting the memory

It is very easy to start the saved programme. Place your
meal in the appliance. Close the appliance door.
Touch the field.
i
1.
The saved settings will be displayed.
Touch the field.
I
2.
The cooking time will count down in the display.
The cooking time has elapsed
An audible signal will sound. Open the appliance door
or touch II/ . The clock will reappear.
Ø
Pausing
Touch the II/ field once or open the appliance door.
Ø
Operation will be paused. The indicator lamp above the
field will flash. After closing the door, touch the
I
again.
All manuals and user guides at all-guides.com
Cancelling operation
Touch the II/
the II /
PProgrammes
P r o g r a m m e s
programmes. You select a programme and enter the
weight of your food. The program then applies the most
suitable settings.
Note: You can choose from 7 programmes.

Setting a programme

Once you have selected a programme, configure the
settings as follows:
1.
2.
to finish;
i
3.
field.
i
4.
You will see the cooking time for the programme
counting down.
The cooking time has elapsed
An audible signal will sound. Open the appliance door
or touch II/
Making amendments
field
I
Touch the II/
field twice or open the door and touch
Ø
field once.
Ø
Y ou can prepare food really easily using the various
Touch the field repeatedly until the required
=
programme number appears.
The indicator lamp above the field will light up.
Touch the field.
A
The indicator lamp above the field will light up and a
default value for the weight will appear in the display.
Use the settings area to specify the weight of the
dish.
Touch the field.
I
Ø . The clock will reappear.
Ø field twice and reconfigure the settings.
Memory
en
27