Hardware Used; Bb M6 Flat Washer X; Cc M6 X 15 Mm Short Bolt X; Ll M6 Wrench X - Allen + Roth L-Gz401Pco-C1 Mode D'emploi

ASSEMBLY INSTRUCTIONS
6. Attach plastic caps (AA) to one end of
each netting tube, then insert 7 hooks
(JJ) into the inside rail of long mosquito
netting tube (H1) as shown and 6 hooks
(JJ) into the inside rail of short mosquito
netting tubes (I1).
Then, attach plastic caps (AA) to the other
ends of each of the netting tubes.

Hardware Used

Plastic Cap
AA
JJ Hook
7. Attach long mosquito netting tubes (H1) to
long decorative gutters (A1) and corner
decorative gutters 1 (C1) using short bolts
(CC) and flat washers (BB). Repeat this
step for attaching short mosquito netting
tubes (I1) to short decorative gutters (B1)
and corner decorative gutters 2 (D1).
Tighten with wrench (LL).
Hardware Used
M6 Flat Washer
BB
M6 x 15 mm Short Bolt
CC
M6 Wrench
LL
11 6
H1
JJ
JJ
x 16
AA
x 52
11 7
H1
CC
x 16
x 16
x 1
allenandroth.com
9
AA
H1
A1
BB
H1
CC
C1
BB