(Cc) And Flat Washers (Bb). Tighten With; Bb M6 Flat Washer X; Cc M6 X 15 Mm Short Bolt X; Ll M6 Wrench X - Allen + Roth L-Gz401Pco-C1 Mode D'emploi

ASSEMBLY INSTRUCTIONS
10. Attach the top ends of middle beams (C2)
to the big top frame (B2) using short bolts

(CC) and flat washers (BB). Tighten with

wrench (LL).

Hardware Used

M6 Flat Washer
BB
CC M6 x 15 mm Short Bolt
M6 Wrench
LL
11. Attach the lower ends of middle beams
(C2) to middle beam connectors (E1)
using long screws (EE), flat washers (BB)
and nuts (FF). Tighten with screwdriver.
Hardware Used
M6 Flat Washer
BB
M6 x 55 mm
EE
Long Screw
M6 Nut
FF
12. Attach one end of left long support beams 112
of big top long side (D2) to middle beams
(C2) using short screws (DD) and flat
washers (BB). Repeat this step for
another left long support beams of big top
long side (D2). Tighten with screwdriver.
Hardware Used
M6 Flat Washer
BB
M6 x 15 mm
DD
Short Screw
11
10
B2
BB
CC
x 8
x 8
C2
x 1
11
11
FF
BB
x 8
x 8
x 8
12
BB
DD
x 16
x 16
allenandroth.com
11
BB
CC
C2
E1
EE
C2
D2