Installation; Attaching And Aligning The Appliance - Gaggenau AW 2 Série Notice D'utilisation Et De Montage

Installation

1 Screw on the fixing bracket for the flue duct.
2 Screw on brackets for the extractor hood hand-
©
tight, max. 3 Nm.
28
3 Screw in threaded pin, leaving it protruding out of
the wall by 5 - 9 mm..
¨

Attaching and aligning the appliance

1 Initially remove the protective foil from the back of
the appliance and, following installation, remove
the foil completely.
2 When attaching the appliance, ensure that it
engages firmly with the brackets.
3 Align the appliance horizontally by turning the
brackets. If required, the appliance can be moved
to the right or left.
ª
«
¬