Storage, Transportation; Troubleshooting; Disposal - Lux Tools A-Rm-1X20/33 Set A Notice Originale

GB
Installing
NOTICE! Risk of damage to the
device! Pay attention to the rota-
tion direction of the blade (arrow).
– Observe the installation direction: Blade
must fit, as shown, onto the cut-outs (25).
– Carefully attach the blade (24).
– Tighten the blade screw (23) using a 14
mm hexagon spanner (35-40 Nm).
Storage, transportation
Storage
DANGER! Risk of injury! Store
the unit in such a way that it cannot
be started by unauthorised per-
sons.
Ensure that no one is able to hurt
themselves on the stored unit.
NOTICE! Risk of damage to the
device! Do not stored unprotected
in a damp environment.
Error/Fault
Device does not work.
Unit does not switch on.
Strange noise.
Cut result is not sufficient.
If you can't fix the fault yourself, contact your
nearest vendor. Please be aware that any
improper repairs will also invalidate the war-
ranty and additional costs may be incurred.

Disposal

Disposal of the appliance
A crossed-out wheelie bin icon
means: Batteries and rechargeable
batteries, electrical or electronic
devices must not be disposed of with
household waste. They may contain
substances that are harmful to the environ-
ment and human health.
Consumers must dispose of waste electrical
devices, spent portable batteries and
rechargeable batteries separately from
household waste at an official collection point
38
– Clean unit before storing.
– Store the tool in a dry and well ventilated
Transportation
– When dispatching, try to use the original

Troubleshooting

What to do when something doesn't
work...
Malfunctions are often caused by minor
faults. You can easily remedy most of these
yourself. Please consult the following table
before contacting the vendor. You will save
yourself a lot of trouble and possibly money
too.
Cause
Battery pack discharged?
Battery pack defective?
Did you wait for the delay?
Screws/parts come loose?
Foreign objects in the blades? Remove foreign objects.
Blade damaged?
Blade is blunt?
to ensure that these items are processed cor-
rectly. The product can be returned free of
charge in accordance with the legal require-
ments, for example through a municipal
waste disposal company or a dealer.
Batteries, rechargeable batteries and
lamps that are not permanently
installed in waste electrical equipment
and can be removed in a non-destruc-
tive way must be removed and disposed of
separately before disposal of the equipment.
Lithium batteries and rechargeable battery
packs of all systems are only to be handed in
to the waste collection points in a discharged
state. The batteries must always be protected
against short circuits by taping off the poles.
All end users are responsible for deleting any
personal data stored on waste devices prior
to their disposal.
place.
packaging, if possible.
DANGER! Risk of injury! Unpro-
fessional repairs may mean that
your unit will no longer operate
safely. This endangers you and
your environment.
Remedy
► Charging the battery pack –
p. 36
Contact your local vendor.
Wait for the switch on delay
of 2 seconds.
Tighten screws.
Have blade sharpened, or re-
place.