PRO-POINT 8708083 Manuel D'utilisation page 18

8708083 14 IN. METAL DRY CUT SAW V1.1
STORAGE
When not in use for an extended period,
apply a thin coat of lubricant to the steel
parts to avoid rust. Remove the lubricant
before using the tool again.
Fold the down arm (#17) to the base and
push in the locking knob (Fig. 11-1) to lock
the arm in place.
REMOVAL FROM STORAGE
Fig. 11
Unlock the tool and raise arm by pressing
down on the arm slightly and pull out the
locking knob (#93). The motor arm will then
pivot upward.
DISPOSAL
Recycle a tool damaged beyond repair at the appropriate facility.
Contact your local municipality for a list of disposal facilities or
by-laws for electronic devices, batteries, oil or other toxic liquids.
IMPORTANT! DO NOT pollute the environment by allowing
uncontrolled discharge of waste oil.
TROUBLESHOOTING
Visit a Princess Auto Ltd. location for a solution if the tool does
not function properly or parts are missing. If unable to do so,
have a qualified technician service the tool.
18 For technical questions call 1-800-665-8685