PRO-POINT 8708083 Manuel D'utilisation page 10

8708083
6. Remove adjusting keys and wrenches before turning the
tool on. A wrench or a key that is left attached to a rotating
part of the tool increases the risk of personal injury.
7. Never force the tool. Excessive pressure could break the
tool, resulting in damage to your workpiece or serious
personal injury. If your tool runs smoothly under no load,
but does not run smoothly under load, then excessive
pressure is being used.
8. Do not touch an operating motor. Motors can operate at
high temperatures and can cause a burn injury.
9. Only use accessories that are specifically designed for use
with the tool. Ensure the accessory is tightly installed.
10. Only use an accessory that exceeds the No Load Speed
rating (see Specifications).
CUTTING TOOL PRECAUTIONS
WARNING! Some surfaces contain materials which can be toxic.
When working on materials that may contain lead, asbestos,
copper chromium arsenate or other toxic materials, extra care
should be taken to avoid inhalation and minimize skin contact.
The term cutting accessory is used to represent a cutting
blade, cutting wheel or a cutting bit.
1. Keep hands away from the cutting area and the cutting
accessory.
2. Only use a cutting accessory of the recommended size (see
Specifications).
3. Use the correct mounting hardware. The mounting
hardware is designed to hold the cutting accessory on the
tool to allow optimum performance and safety of
operation. Mismatched mounting hardware may result in a
tool malfunction and cause an injury.
3.1 Only use a cutting wheel with the correct arbor size
and shape that matches the tool's spindle.
10
14 IN. METAL DRY CUT SAW
For technical questions call 1-800-665-8685
V1.1