HOMCOM 820-341V80 Manuel D'instructions page 5

NO.
FLAME
1
2 THERMOSTAT
3 TIMER
4 MODE
Remote Control
NO. CONTROLS
1 FLAME
2 POWER
3 TIMER
4 HEAT
5 Tem Up
6
Tem Down
CONTROLS
Turn on or off the Flame.
Turn on or off the heater.
Press the TIMER button more than once, the value will
vary from 0 to 12hr (1 hr interval) in circulation.
Press the HEATER button to toggle between the two
heat settings(Low/High).
Setting increasing temperature value.
Setting decreasing temperature value.
FUNCTION
Turn on or off the Flame.
Set temperature indication varies from 59℉
to 90℉. Once you have chosen the desired
temperature, the heater will remain on until
the room temperature increases to the
temperature on the digital display. The
heater will cycle on and off to maintain the
desired room temperature.
Press the TIMER button more than once, the
value will vary from 0 to 12hr (1 hr interval) in
circulation.
Press the HEATER button to toggle between
the two heat settings (Low/High), or turn off
the heater.
FUNCTION
5