Safety Features - Homcom 820-341V80 Manuel D'instructions

19. DO NOT use outdoors.
20. WARNING: To reduce the risk of fire or electric shock, DO NOT use this unit with any
solid-state speed control device.
21. DO NOT attempt to repair or adjust any electrical or mechanical functions on this unit.
Doing so will void your warranty. The inside of the unit contains no user serviceable
parts. Qualified personnel should perform all servicing only.
22.Always use the product in an upright position.
SPECIFICATIONS
Voltage Rating
Power Consumption
Unit Size
Unit Weight

SAFETY FEATURES

Tip-Over Safety Feature
This heater is equipped with a shut-off safety feature. Once the heater is tipped over, an
internal equipment will automatically shut the heater off. Once the heater is restored to an
upright position, the heater will reset. To continue operation, press the power button on
the control panel.
Overheat Safety Feature
This heater is equipped with a overheat safety feature. When the heaters internal
components reach a certain temperature that could cause overheat and possible fire, the
heater will automatically shut off.
● A thermal overload protector is built in to prevent over- heating. When an "overheat"
temperature is reached, the heater will automatically shut off. Operation can resume
only when the user resets the unit.
●To reset the unit, unplug the heater, ensure the power is turned off, and wait 15 to 20
minutes for the unit to cool down.
● Follow INSTRUCTIONS FOR USE to return heater to operating mode.
WARNING:
It is normal for the power cord to feel warm to the touch; however, a loose fit between
the outlet and the plug may cause overheating of the plug. If this occurs, try inserting
the plug into a different outlet. Contact a qualified electrician to inspect the original
outlet for damage.
SAVE THESE INSTRUCTIONS
120V (60Hz)
1500W
12.7 in. (W) x7.1 in. (D) x20.6 in. (H)
10.7lbs
THIS APPLIANCE HAS A POLARIZED PLUG (one blade is
wider than the other). To reduce the risk of electric shock, this
plug is intended to fit in a polarized outlet only one way. If the
plug does not fit fully in the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician to install the proper
outlet.
DO NOT ATTEMPT TO MODIFY THIS PLUG OR DEFEAT
THIS SAFETY FEATURE IN ANY WAY.
3