Publicité
Les langues disponibles
Les langues disponibles
6. Connect Water Supply Hose
CAUTION: Risk of restricted water flow and product damage. The supply hose must not be taut, kinked, or
twisted during installation.
NOTE: Handtighten the outlet hose connector to the tank. Do not use a pliers or a wrench.
Connect the water supply hose to the supply stop.
Place a bucket under the outlet hose.
Turn ON the water supply.
Flush the water supply for 1 minute to remove any debris.
Turn OFF the water supply.
Route the supply hose through the hole in the bowl.
Connect the water supply hose to the tank inlet.
Turn ON the water supply. Flush the toilet.
Check all connections for leaks, and make adjustments as needed.
1535881-2-A
10
Kohler Co.
Publicité
