FUXTEC FX-RMR66 Mode D'emploi page 56

Manual_FX-RMR66_Int24_rev01
Move the clutch into the starting position
Insert the ignition key and turn it to ON for electrical contact, then turn it to start the engine.
Release the ignition key after the engine starts. Once the engine is started, switch throttle control to
the minimum speed position.
Driving without using the mowing blades
Adjust the cutting height to the highest position.
Switch the Clutch handle to the drive position.
Fully press down the brake pedal and move the gear shift lever to the first position (to control the
speed according to adjust to different position), then release the brake pedal slowly.
56