Group » Functions - Adeunis RF Vokkero Evolution 3 ARF7668AB Notice D'emploi

Select channel C01, C02, or C03 using the "+" or "-" keys and press "OK" to validate your
choice.
Note: To stop the Fast Channel mode, return to the dedicated sub-menu and select none
(cf. the "procedure" part above).
It is only possible to activate one Fast mode at a time. Therefore the Fast Channel mode
can only be activated at the same time as the Fast volume mode.
Adjusting the "Fast volume" setting
Principle:
In normal mode, the volume setting is accessed by unlocking the keypad and then pressing
either one of the "+" or "-" keys for 2 seconds.
The "Fast volume" function makes it possible to do away with these operations, thereby
enabling immediate access to the volume setting.
Procedure:
• Access the Options menu. Press "OK".
• Access Fast mode. Press "OK" to validate your choice.
• In the Fast mode menu, select Fast Volume by using "+" or "-".
• Press "OK" to validate your choice.
• Press "Menu" to return to the home screen.
Note: To stop the Fast Volume mode, return to the dedicated sub-menu and select none (cf.
the "procedure" section above).
It is only possible to activate a single Fast mode at a time. Therefore, the Fast Volume
mode can only be activated at the same time as the Fast Channel mode.
4.4. « Group » functions
Principe :
The «Group» function enables you to determine which "Group" (or "team") your Vokkero
terminal belongs to. Up to 7 different groups can be selected. Each of the groups has its own
listening and speaking authorisations within the network, up to a limit of 6 terminals in full-
duplex mode and an infinite number of terminals in "listener" mode.
An additional functionality is also available via the «Group» menu. You can opt to address
one terminal in particular without the other users hearing you, no matter what group they
are in. This functionality can be accessed in the group menu (cf. the procedure below) by
selecting the heading "M0x" (x indicates the terminal number which you want to speak to in
particular) from the list provided. Each terminal is identified by its role number.
For example: terminal 1 = M01.
Procedure:
• Access the Options menu. Press "OK".
• Access the Group menu. Press "OK" to validate your choice.
• In the Group menu, select On by using "+" or "-".
• Press "OK" to validate your choice.
• Press "Menu" to return to the home screen.
207666A-V1.4-UG-VOKKERO-EVOLUTION3
GB
29