Thank you very much for purchasing TOSHIBA Super Heat Recovery Multi (SHRM-i) Air conditioner.
Please read this manual carefully before using your Flow Selector unit.
• When installing an indoor or outdoor unit, follow the installation manual supplied with the unit.
• To connect the Flow Selector unit to an outdoor unit with pipes, a branching joint or header is required.
Choose one according to the capacity of the units.
• Nitrogen gas is filled in the selection unit.
ADOPTION OF NEW REFRIGERANT
This Air Conditioner uses R410A an environmentally friendly refrigerant.
Contents
1
2
3
4
5
REFRIGERANT PIPING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
6
ELECTRIC WORK. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
EN-1
- 1 -
Accessory parts and Parts to be procured locally
Accessory parts
Q'ty RBM-
Part name
Y0383FUL Y0613FUL Y0963FUL
Installation
1
Manual
Attached wire
(For power
1
supply)
Attached wire
(For control
1
wiring)
Heat insulating
3
pipe
Heat insulating
-
pipe
Heat insulating
2
pipe
Attached pipe
1
Attached pipe
1
Attached pipe
1
Wire joint
2
Shape
1
1
-
(Be sure to hand over to customers.)
For power supply from indoor unit
1
1
(3-core, 19.6 ft (6 m))
For communication with indoor unit
1
1
(5-core, 19.6 ft (6 m))
For heat insulating of suction gas,
3
2
discharge gas, and gas pipe connecting
sections
-
1
For heat insulating of discharge gas
For heat insulating of liquid pipe
2
2
connecting section
-
-
Ø3/8" - Ø1/4", connection pipe
-
-
Ø5/8" - Ø1/2", connection pipe
-
-
Ø5/8" - Ø3/8", connection pipe
2
2
For connection with certain indoor units
Usage
EN-2