Print Quality Problems - Epson XP-850 Guide Rapide

■
If you connected a telephone or answering machine, make sure it is connected to the
port. Do not use a phone line splitter.
EXT.
■
If an answering machine is connected, set the number of rings to answer for receiving
faxes to be greater than the number of rings for the answering machine.
■
Try lowering the

Print Quality Problems

■
Load the paper printable side down (usually the whiter, brighter, or glossy side) in the
paper cassettes. Load paper printable side up in the rear paper feed slot.
■
Make sure your paper isn't damp or curled.
■
For the best print quality, use EPSON papers (see page 8) and genuine EPSON ink
cartridges (see page 28).
■
Make sure the paper type setting on the touch screen or in your printer software is
correct for the type of paper you loaded (see page 18).
■
If you notice light or dark bands across your printouts or they are too faint, run a
nozzle check (see page 26) to see if the print head needs cleaning.
■
If you notice jagged vertical lines, you may need to align the print head. See the online
User's Guide for instructions.
■
The ink cartridges may be low on ink. Check your cartridge status and replace
cartridges, if necessary (see page 29).
■
Clean the scanner glass with a soft, dry, lint-free cloth (paper towels are not
recommended), or use a small amount of glass cleaner on a soft cloth, if necessary. Do
not spray glass cleaner directly on the glass.
38
Solving Problems
setting.
Fax Speed