Table des Matières
Publicité
Print Quality/Layout
Problems
Problèmes de
qualité d'impression/
de disposition
Qualitäts-/Layout-
Probleme
Problemen met de
afdrukkwaliteit/lay-
out
EN
Try the following solutions in order from the Top. For further information, see your online User's Guide.
Problems
You see banding (light lines) in your printouts or copies.
Your printout is blurry or smeared.
Your printout is faint or has gaps.
Your printout is grainy.
You see incorrect or missing colors.
The image size or position is incorrect.
Solutions
Make sure you select the correct paper type.
A
Make sure the printable side (the whiter or glossier side) of the paper is facing in the right direction.
B
Clean the print head.
& 34
C
R
& 36
Align the print head.
D
R
If quality is not improved, try aligning using the printer driver utility. See your online User's Guide to align the print head.
To clean the inside of the printer, make a copy without placing a document on the document table/ADF. For further
E
information, see your online User's Guide.
Use up ink cartridge within six months of opening vacuum package.
F
Try to use genuine Epson ink cartridges and paper recommended by Epson.
G
If a moiré (cross-hatch) pattern appears on your copy, change the Reduce/Enlarge setting or shift the position of your
H
original.
Make sure you selected the correct Paper Size, Layout, Expansion, and Reduce/Enlarge setting for the loaded paper.
I
& 26
R
Make sure you loaded paper and placed the original correctly.
J
If the edges of the copy or photo are cropped off, move the original slightly away from the corner.
K
Clean the document table. See your online User's Guide.
L
& 14
R
& 46
R
& 16, 17
R
Solution No.
ABCDFH
ABCDEG
ABCF
D
CF
IJKL
& 16
R
Publicité
Table des Matières
