Lincar ERICA PLUS Instructions D'entretien page 48

SWITCH CONTROL PANEL FUNCTION
The Pellet Stove is equipped with an electronic card, installed inside appliance, who
•
receives the function instructions from the control panel with a display who shows the
data. Pushing different button, it's possible to select different functions
Led set power
Led set ambiente
P1
Button
Decrease/menu/
set ambiance
P2
Button
Increase/stove status/
set power
WHAT ARE THE BUTTONS FOR?
Pulsant
Decrease temperature
1
Increase power
2
3
ON/OFF
Led crono
Describing
TEMPERATURE
PROGRAMMAZIONE
TEMPERATURE
PROGRAMMATION
PROGRAMMATION
Led alarm
Modality Operation
SET
Decrease the ambient SET temperature value
Decrease the selected parameter
SET POWER Decrease value work power
SET
Increase the ambient SET temperature value
Increase the selected parameter
SET POWER Increase the value of working power
Pressed for 2 seconds turns the stove on or off if it is
WORK
turned off or on respectively
Allows you to select the parameters to be
programmed.
48/148
IT IT IT IT- - - - EN EN- - - - FR FR- - - - ES ES mod. ERICA PLUS
EN EN FR FR ES ES
Display stove
status/power/parameter
Led screw feeder
/Exchanger-pump
/bougie
Led ON/OFF
P3
Button
ON/OFF
/esc/confirm