Sony alpha HVL-MT24AM Mode D'emploi page 33

TTL flash
Test flash
3
Select shutter speed and aperture (p. 34 - 39).
4
Turn the appropriate manual-flash-control dial and select
the desired power level (p. 34 - 39).
 When viewed from the rear (control panel side), the manual-flash-control
dial for twin flash A is on the left, and that for twin flash B is on the right.
You can select any power level setting on the upper scale from 1/1 to 1/64.
A flash
 In manual flash mode, if a proper exposure has been obtained, the flash-
ready lamp will not blink on the control panel after a photo is taken.
 Using customized functions, manual flash may be selected without setting
the camera in M mode. The size of the steps on the manual-flash-control
dials can also be changed from full-stop increments to half-stop increments
(p. 48).
Manual flash
Test flash
TTL flash
Modeling flash
Continued on the next page
Manual flash
Modeling flash
B flash