Steelcase Migration SE Référence Rapide page 4

User Guide
For additional information refer to
the User Guide.
Guía del usuario
Para obtener información adicional
consulte la guía del usuario.
Guide de l'utilisateur
Pour en savoir plus sur l'utilisation
consultez le guide de l'utilisateur.
Error Code Displayed on Digital Display Controller
Contact your Steelcase dealer for a complete list of error codes and additional support.
ERROR CODE
E01
E04, E05, E06,
E21
E07/Hot
E08, E09, E19
E11
E99
Póngase en contacto con su distribuidor Steelcase para obtener una lista completa de códigos
de error y asistencia adicional.
Communiquez avec le détaillant Steelcase pour obtenir une liste complète des codes d'erreur
ou encore du soutien supplémentaire.
02/06 ©2025 Steelcase Inc. All rights reserved. All specifications subject to change without notice.
Trademarks used herein are the property of Steelcase Inc. or of their respective owners.
Todos los derechos reservados. Todas las especificaciones están sujetas a cambio sin previo aviso.
Tous droits réservés. Toutes les spécifications sont modifiables sans préavis.
Part No. / Número del documento / Numéro de document 1445291002 — Rev. E
DESCRIPTION
Desk or Bench is overloaded or
has hit an obstruction.
Over current/ Short Circuit on
one or more motors.
System incorporate software
protection against motor
overheating.
One or more motors are not
detected.
Collision detected.
Handswitch can't read data
from Controller.
SOLUTION/TROUBLESHOOTING
Remove some loads from the table top.
Remove some loads or distribute the load
more evenly on table top.
Rest the table top for 10 mins to resume
full desk capability.
Check whether the motor cable plugs for
each motor are properly plugged in.
Check if the desk hits any obstacles
along the desk's movement path or
getting held by any hanging wires.
Plug Switch into HS port instead of
COM port.