Publicité
Les langues disponibles
Les langues disponibles
(STEP 6 cont.)
Option 2: Hardwire Power
You Will Need
Fuse tap
Butt connector or wire nuts
Use the steps below as a general template for wiring the power. There are multiple
options for wiring and steps will vary depending on the RV type.
■ Locate the RV's 12V Power distribution panel. The 12V power distribution panel is
typically located near the main control panel, under the dinette seat, behind a cabinet
door, or in the storage compartment. Check your RV's manual for specifics. The panel
will have multiple fuses or breakers for different 12V circuits within the RV. It' s often
marked with labels indicating the circuits (e.g., lights, water pump).
■ Plan the Installation. Plan cable paths from the booster to the 12V power source,
ensuring there is enough cable.
■ Choose a Suitable 12V circuit. Look for an unused or spare fuse slot in the distribution
panel. This is the ideal place to add a new circuit for your booster. Alternatively, you can
19
ENGLISH
Cable crimper tool
Electrical tape
Publicité
