Installing The Glass Door; Installing Accessories - Sentiotec C2116 Instructions Pour L'installation

Installations for instructions

3.6. Installing the glass door

Screw the two door fittings onto the glass element, making sure that they are
straight and that the doors open outward.
The bottom drill hole of the door handle is 92.4 cm high.
The alignment of the fittings is achieved by adjusting / rotating both
plastic inserts.

3.7. Installing accessories

The door handles are screwed together from the inside.
Install the door magnet and sleeve plate.
Install the roof cover slats and the roof trim slats on the outside.
p. 12/12