SOMFY Axroll NS Mode D'emploi page 6

■
Operating
information
(cont')
Cycle counters
Accessories
consumption
Log of the last
10 faults
■
Parameter list
Functioning Modes
Security Input 1
(Safety Edge)
Security Input 2
(Photocells)
6
All manuals and user guides at all-guides.com
Power consumed in Watts (from 00 to 99)
.... : see faults codes above.
To clear the fault codes, select the parameter
press and hold the
dashes appear
For the fault codes from
Once the fault is corrected, there is no need to clear
the log fault code to return to normal operation.
For defect codes from
Once the fault is corrected, you must
clear the log defect code to return to
normal operation.
Automatic Mode (safety accessories are required)
Forced mode (Safety devices are deactivated)
Active when closing the door + prevents the door
Contact for connecting an emergency stop device
Active when closing the door + prevents the door
Contact for connecting an emergency stop device
Tens and units
Thousands and hundreds
Hundred and tens of thousands
button for 3 seconds until
.
to :
to :
Semi-Automatic Mode
Sequential Mode
Sequential Mode +Time out
(safety accessories are required)
3-buttons Mode (Up - Stop - Down)
No safety edge connected
Active when opening the door
Active when closing the door
No accessory connected
Active when opening the door
Active when closing the door
....
= 00
= 00
opening
= 00
opening
01
02
03
04
05
01
02
03
04
01
02
03
04