Publicité
Les langues disponibles
Les langues disponibles
Click "OK" to start printing.
T he prog r am will proc ess the
model and then transfer the data
to the printer.
5
A f t er s endi n g t h e d a t a, t he
program will suggest the amount
of material and time needed for
the model in a pop up window.
At the same time, the nozzle will
start to heat up. The print job will
start automatically.
6
Annotation of Print Preview Interface
a. Display the printer model.
b. Dispaly the noozle height.
c. Click to enter printer preference to set printing parameters.
d. If your model is not solid (defective), turn on this option.
e. No raft will be printed if this is turned on, print bed leveling will be disabled
as well.
f. Print Quality: the better the print quality the slower the print speed.
g. Set the pause height, the printer will pause at indicated heightness for
changing filaments.
h. Continuous heating of platform after printing, save heating time for
consective printing and preventing breakage due to rapid cooling in cold
weather.
When printer finished receiving the data, user could disconnect it
from computer for untethered printing.
a
d
f
e
:
16
c
b
h
g
Publicité
