Appendix (English); Technical Specifications - Alesis DRUMS STRIKE AMP 12 Guide D'utilisation

Appendix (English)

Technical Specifications

Output Power
Drivers
Crossover Frequency 2.0 KHz
Maximum SPL
Frequency Response 53 Hz – 20 kHz
Frequency Range
Horn Coverage
Equalization
Connectors
Controls
Indicators
Protection
Power
Enclosure
Dimensions
(height x width x depth)
Weight
Specifications are subject to change without notice.
Trademarks & Licenses
Alesis is a trademark of inMusic Brands, Inc., registered in the U.S. and other countries.
All other product or company names are trademarks or registered trademarks of their respective
owners.
2000 W
(peak, 1300 LF + 700 HF)
1000 W
(continuous RMS, 650 LF + 350 HF)
Low-Frequency 12.0" (305 mm) low-frequency driver, 3.0" (76 mm)
High-Frequency 1.4" (35 mm) voice coil, neodymium-magnet
131 dB , 128 dB
(peak)
(+3 dB)
46 Hz – 22 kHz
(-10 dB)
90º horizontal x 60º vertical
Contour switch with low- and high-frequency +3 dB boost
(2) XLR/TRS 1/4" (6.35 mm) combo inputs
(1) XLR link output
(1) IEC power cable input
Power switch, (2) volume control knobs
ground-lift switch
(2) power LEDs
(1 front-panel, 1 rear-panel)
Electronic clip, thermal & transducer overdrive
IEC
Connection
Input Voltage 100 V~, 110–120 V~, 220–240 V~; 50/60 Hz
Fuse 100–120V T10AL AC250V
220–240V T5AL AC250V
Consumption 800 W
Trapezoidal, injection-molded polypropylene enclosure with perforated
steel grille
23.8" x 13.9" x 13.8"
605 x 354 x 350 mm
35.9 lb.
16.3 kg
high-temperature voice coil
high-frequency driver with precision waveguide
(continuous) (dB-SPL @ 1 m)
(nominal)
(1 per input)
, clip limiter LED
, EQ contour switch,
(switchable)
27