cecotec PERFECT FIX 20 Manuel D'instructions page 46

ENGLISH
Glue comes into contact
with your fingers
The piece to be glued
melts
Information
- After every maintenance and repairing work, wait for at least 10 minutes to restart the
device.
- If the appliance does not work properly, contact the official Cecotec Technical Support
Service.
6. TECHNICAL SPECIFICATIONS
Product: EU01_100062
Product reference: Perfect Fix 20
Rated power: 9-20 W
Voltage: 100-240 V ~
Frequency: 50/60 Hz
Product: EU01_100063
Perfect Fix 100 Pro
Rated power: 21 W - 100 W
Voltage: 100-240 V ~
Frequency: 50/60 Hz
Technical specifications may change without prior notice to improve product quality.
Made in China | Designed in Spain
46
PERFECT FIX 20 + PERFECT FIX 100 PRO
Glue may go through materials, like paper or certain fabrics.
You must use protective gloves to avoid possible burns when
operating the glue gun. It is also advisable to use a heat-
resistant base, e.g. made of silicone.
If the piece to be glued is made of steel it may have heated
up too much. It is advisable to use protective gloves to avoid
possible injuries.
The piece to be glued may be made of a heat-sensitive
material, e.g. polystyrene. These materials are not suitable
for hot melt glue.
Use special glue sticks.