cecotec PERFECT FIX 20 Manuel D'instructions page 42

ENGLISH
1. PARTS AND COMPONENTS
Fig. 1
1. On/off switch
2. Operating trigger
3. Support
4. Nozzle
5. Nozzle thermal protection cover
6. Glue bars
2. BEFORE USE
- This appliance is packaged in a way as to protect it during transport. Take the appliance
out of its box and remove all packaging materials. You can keep the original box and
other packaging elements in a safe place to prevent damage to the device if you need
to transport it in the future. In case the original packaging is disposed of, make sure all
packaging materials are recycled accordingly.
- Make sure all parts and components are included and in good conditions. If there is any
piece missing or in bad conditions, contact the official Cecotec Technical Support Service
immediately.
- Do not remove the serial number of the appliance in order to keep a correct traceability of
it in case of assistance.
Box content:
- Hot melt glue gun
- Support
- Glue bars x 80
- Instruction manual
3. OPERATION
The heating component of the appliance is manufactured with a positive temperature
coefficient (PTC), which can heat up very fast and control the temperature automatically. The
temperature cannot increase beyond the maximum temperature for which the appliance was
designed, which pevents damage to the appliance itself, thus expanding its lifespan.
1. Ensure that the work area is clean and safe.
2. Check that the surface to which you will apply the glue is clean, dry and free of
grease or other contaminants that may affect the adhesive's adhesion.
42
PERFECT FIX 20 + PERFECT FIX 100 PRO