Alarm Input Options; Alarm Outputs - Dedicated Micros Dennard DTX1000 Manuel D'installation

5. ALARM INPUT OPTIONS

WARNING:
Only qualified persons should install this apparatus. It contains no user serviceable parts.
Alarm Inputs
Alarm is active on opening of contacts. Connect each alarm to a volts free contact
1 2 3
Alarm Output
A set of No Volt changeover contacts are provided as an output to the alarm package, closure
takes place on detection and they stay closed for a programmed length of time. the contacts are
accessed via alarm contacts 3, 4, 5 on the smaller green connector.
These contacts are suitable for low voltage control functions only.
DO NOT connect to mains potential.
DO NOT connect mains potentials to these contacts, they are low voltage only
Dennard DTX1000 Installation Manual
4 5 6 7
EXPANDED VIEW
9 10 11 12
8
TIMELAPSE
13 14 15 16
Page. 13