Position Air Conditioner - Haier HWR05XCK Guide D'utilisation Et D'entretien

NOTES:
■ Handle the air conditioner gently.
■
Be sure your air conditioner does not fall out of the opening
during installation or removal.
■
The place where the power cord exits the air conditioner should
be no more than 6 ft (183 cm) from a grounded outlet.
■
Do not block the louvers in the front panel.
■ Do not block the louvers on the outside of the air conditioner.
Center the air conditioner in the window. Make sure the bottom
guide of the air conditioner drops into the notches of the basepan
angle.Lower the window sash behind the top channel to hold the
cabinet in place
NOTE: Your model may differ from the one shown.
A
A. Side curtain against window channel
B. Window sash behind top channel
C. Bottom channel in behind windowsill
A
B
C
D
A. Window frame
B. Top channel

Position Air Conditioner

B
C
C. Bottom guide
D. Window lock bracket
Attach Side Curtains to Window
1. Pull the left-hand curtain out until it fits into the window
channel.
2. Use a 1⁄8" drill bit to drill a starter hole through the top hole in
the side curtain and into the window sash.
Insert one of the 31⁄32" screws through the top hole of the
3.
lefthand curtain and into the window sash.
4. Repeat for the right-hand curtain.
Top View
Use a 1⁄8" drill bit to drill a starter hole through the bottom hole
5.
in the side curtain and into the window frame.
Insert one of the 31⁄32" screws through the bottom hole of the
6.
left-hand curtain and into the window frame.
7. Repeat for the right-hand curtain.
Bottom View
7