Operation; Adjusting The Browning Level; Toasting; Interrupting The Toasting Process - SilverCrest SDLTD 1400 A1 Mode D'emploi

Operation

Adjusting the browning level

The desired level of browning, from "light" (I) to "dark" (IIIII), can be adjusted
infi nitely with the toasting dial 5.
NOTICE
► Take note that, subject to the demand made on the toaster, the level of
browning can vary somewhat with an unvarying adjustment of the toasting
dial 5! The less the number of slices inserted, the higher is the browning
level. Thus, if you are not intending to toast many slices, always set the
toasting dial 5 a little lower.

Toasting

CAUTION - RISK OF FIRE!
When the appliance is in operation, do NOT cover the toasting slots 1.
►
There will be a risk of fi re! The appliance could be irreparably damaged!
1) After setting the desired browning level, insert the bread into the toaster
slots 1.
2) Press the operating slide 3 downwards. The automatic bread centring device
centres the inserted bread in the toaster slots 1. During the toasting process
the control lamp integrated in the "Stop" button 4 glows.
3) When the desired level of browning has been reached the toaster switches
itself off automatically, the slices are ejected to the top and the control lamp
goes out.

Interrupting the toasting process

If you wish to interrupt the toasting procedure, press the button "Stop" 4.
The toaster switches itself off and the bread slices are ejected upwards.

Warming function

The warming function enables you to warm bread without browning it. As
an example, for toast that has gone cold. The bread is only briefl y warmed.
1) Insert the bread and press the operating button 3 down.
2) Press the „Warm up" button
lamp integrated in the „Warm up" button
3) When the bread has been reheated, the appliance switches itself off auto-
matically and the slices are ejected upwards.
SDLTD 1400 A1
7. During the warm up process the control
7 glows.
GB
IE
7