Checking And Setting The Water Hardness; Tips On Energy Saving; Daily Maintenance And Cleaning; Daily Maintenance - NEFF CV 7760 N Mode D'emploi

36 | English
1. Deploy the appliance fully (see "Deploy-
ment system").
2. In the drink selection menu, select
Espresso .
3. Press (6).
4. While the grinding unit is running, adjust
tСО rШtarв sОХОМtШr (11) ПrШm iЧО
coarse or back as required.
The new setting will not
become apparent until after the
second cup of coffee.
Tip: For dark roast coffee beans, choose a
iЧОr РrТЧН, ПШr ХТРСtОr bОaЧs a МШarsОr РrТЧН.
Checking and setting
the water hardness
The water hardness setting can be adjusted
on this appliance. It is important to set the
water hardness correctly, so that the appli-
ance indicates accurately when the descal-
ing programme should be run. The factory
setting for the water hardness is 4.
You can check the water hardness using the
enclosed test strip or by asking your local
water supplier.
DТp tСО tОst strТp brТОlв ТЧ аatОr, РОЧtХв
shake off any drips, and check the result
after one minute.
Water hardness levels and settings:
Level Water hardness
German (°dH) French (°fH)
1 1-7
2 8-14
3 15-21
4 22-30
Neff
to
1-13
14-25
26-38
39-54

Tips on energy saving

 The fully automatic espresso machine
switches to "energy saving mode" auto-
matically after one hour (factory setting).
The appliance uses very little power in
"energy saving mode". The default time
of one hour can be shortened (see "Auto
off after" under "Displaying settings").
The appliance then uses even less
power.
 The appliance is put into "energy saving
mode" by retracting the navigation but-
ton.
 If the appliance is not being used, switch
it off at the power switch.
 If possible, do not interrupt coffee or milk
froth dispensing. Stopping a process
prematurely results in higher energy
МШЧsumptТШЧ aЧН tСО НrТp traв iХХs up
more quickly.
 Always descale the appliance when
Service - descale
"Descaling") to avoid a build-up of lime-
scale. Limescale residue results in higher
energy consumption.

Daily maintenance

and cleaning
Risk of electric shock!
Before cleaning the appliance,
switch it off at the power switch.
Do not use a steam cleaner.
Daily maintenance
1. Wipe the outside of the appliance with a
damp cloth. Do not use scouring agents.
2. Do not use alcohol-based or spirit-based
cleaning agents on the high-gloss sur-
faces.
is displayed (see
C77V60N01 | 09/2008