Tool List; Unpacking - Bertazzoni Rwc60S5Tpns Manuel D'installation, D'entretien Et D'utilisation

INSTALLATION INSTRUCTIONS

TOOL LIST

The tools to be used when installing the product are as
follows:
Cordless drill
12.7 mm (1/
2") spanner
Ladder
8.0 mm drill
bit
Safety gloves
Phillips-head
bit
Bubble level
Tape

UNPACKING

Safety
goggles
• Use a box cutter to remove the tape.
Hammer
• Cut the cardboard packaging along the dotted lines
using a box cutter and remove it.
2.4 mm drill
bit
Box cutter
Tape measure
6.4 mm (1/4")
hex bit
Appliance
trolley
T25 Torx Bits
WARNING
At least two people must carry the
refrigerator.
Fig. 11
21