Frigelux CUBE48A++ Manuel D'utilisation page 28

When the appliance is not in use for long periods, disconnect from the electricity
supply, empty all foods and clean the appliance, leaving the door ajar to prevent
unpleasant smells.
Troubleshooting
You can solve many common problems easily, saving you the cost of a possible
service call. Try the suggestions below to see if you can solve the problem before
calling for service
.
Problems
Unusual noises
The appliance does
not get cold enough
Your appliance does
not get cold at all
Frost forms inside
your appliance
The door is difficult
to open
The appliance is not
working
Solutions
 Check the adjustment of the feet of your appliance and
its stability.
 Check that it is not touching a wall.
 Check that all the movable parts (trays, racks, etc..) are
securely in place.
 Check if the temperature is correct. If this is not the
case, adjust the temperature appropriately.
 Make sure that you have not placed a large amount of
food or hot food in your appliance.
 Be careful not to open the door too often or leave it
open.
 Check that the door is closed tightly.
 Keep your device away from heat sources.
 Make sure that the ventilation around the unit is
respected.
 Check that your appliance is connected to the electrical
supply.
 Check that the circuit-breaker for your house has not
cut out and that the fuse has not blown or been
unscrewed
 Be careful not to open your appliance's door too often
and not to leave it open.
 It is normal for the door to offer some resistance to
being opened, particularly when you have just shut it: a
slight depression forms in your appliance to ensure the
door seals perfectly. AIl you have to do is wait a few
seconds before re-opening.
 Check that your appliance is connected to the electrical
supply.
 Check that the circuit-breaker for your house has not
cut out and that the fuse has not blown or been
unscrewed
28