Publicité
Les langues disponibles
Les langues disponibles
Cleaning before use
Wipe the inside of the appliance with a weak solution of bicarbonate of soda. Then
rinse with warm water using a damp sponge or cloth. Wash the baskets and shelves
in warm soapy water and dry completely before replacing them.
Before plugging in
Check that you have a socket which is compatible with the plug supplied with the
appliance.
DO NOT SWITCH ON UNTIL FOUR HOURS AFTER MOVING THE APPLIANCE.
The coolant fluid needs time to settle. If the appliance is switched off at any time, wait
30 minutes before switching back on to allow the coolant fluid to settle.
Before filling your appliance
Before storing foods in your appliance, turn it on and wait for 24 hours, to make sure
it is working properly and to allow it to reach the correct temperature.
4. USE INSTRUCTIONS
Temperature setting:
Your refrigerator has one control for regulating the temperature. The temperature
control is located at the top of the fridge.
The first time you put your appliance into operation, set the thermostat to "3" and let it
run empty for 4 hours before storing food for it to cool sufficiently.
The range of the temperature control is from position "1" the warmest to "6" the
coldest. Adjust the temperature control to the setting that best suits your needs. The
setting of "3" should be appropriate for home or office refrigerator use.
To turn the refrigerator off, turn the temperature control to "0".
NOTE:
Turning the temperature control to "OFF" position stops the cooling cycle but
does not shut off the power to the refrigerator.
24
Publicité
