Parts Names; Controller Interface - Mitsubishi Electric CITY MULTI PLFY-P VBM-E Série Manuel D'utilisation

2. Parts Names

Indoor Unit
Fan steps
Vane
Louver
Filter
Filter cleaning indication
■
Wired Remote Controller

Controller interface

Function buttons
▌ [ON/OFF] button
Press to turn ON/OFF the indoor unit.
▌ [SELECT] button
Press to save the setting.
▌ [RETURN] button
Press to return to the previous screen.
▌ [MENU] button
Press to bring up the Main menu.
▌ Backlit LCD
Operation settings will appear.
When the backlight is off, pressing any button turns the backlight on
and it will stay lit for a certain period of time depending on the screen.
When the backlight is off, pressing any button turns the backlight on
and does not perform its function. (except for the [ON/OFF] button)
PLFY-P . VBM-E
4 steps
Auto with swing
–
Long-life
2,500 hr
Air outlet
Vane
The functions of the function buttons change depending on the
screen.
Refer to the button function guide that appears at the bottom of the
LCD for the functions they serve on a given screen.
When the system is centrally controlled, the button function guide
that corresponds to the locked button will not appear.
Main display
Fri
Room
Cool Set temp. Auto
Mode Temp. Fan
Function guide
▌ ON/OFF lamp
This lamp lights up in green while the unit is in operation. It blinks while
the remote controller is starting up or when there is an error.
▌ Function button [F1]
Main display: Press to change the operation mode.
Main menu: Press to move the cursor down.
▌ Function button [F2]
Main display: Press to decrease temperature.
Main menu: Press to move the cursor up.
▌ Function button [F3]
Main display: Press to increase temperature.
Main menu: Press to go to the previous page.
▌ Function button [F4]
Main display: Press to change the fan speed.
Main menu: Press to go to the next page.
Filter
Air intake
Main menu
Main Main menu
Vane·Louver·Vent. (Lossnay)
High power
Timer
Weekly timer
OU silent mode
Main display:
Cursor Page
3