Husqvarna ST 224 Manuel D'utilisation page 9

Handle knobs (2)
Shear pins ¼-20 x 1-¾ (6)
Locknut 5/16-18 (1)
Nylon washer (1)
Spring (1)
Cable guide (1) (if equipped)
To install the handle
1. Raise the upper handle to the operating position.
1481 - 005 - 18.05.2021
Locknut 3/8 (1)
Locknuts ¼-20 (6)
Locknut ¼-20 (1)
Carriage bolt 5/16-18 x 5/8 (1)
Shoulder bolt ¼-20 (1)
2. Adjust the handle position to one of the mounting
holes (B) and tighten the handle knobs (C) with
the carriage bolts (D).
D
B
C
9