LENCO MC-250 Mode D'emploi page 33

If Timeout is selected, you can set the backlight of the screen of
20 sec, 30 sec, 45 sec, 60 sec. 90 sec, 120 sec or 180 sec.
If On level is selected, you can set the backlight of the screen of
Medium or Low.
If Dim level is selected, you can also set the backlight of the screen of Standby Level to High,
Medium or Low.
Error messages
Message
Failed to connect
Format error
Network error
Network not ready
Network timeout
Service not available
(DAB)
Update failed
Description
Correct key entered, but router
rejects request
Cannot recognize file format –
independent of network
Problem past router - incorrect data
being received from network
Problem with connection to router
Problem past router - no response
being received from network
No DAB reception
Software upgrade failed
33
Timeout to On, 10 sec,
Power On level to High,
Example
MAC filtering enabled on
router
Received MP3, but found that
the stream wasn't MP3 when
trying to decode
Data obtained from server is
unreadable.
Router switched off
Streaming IR station and
suddenly station becomes
unavailable