LENCO MC-250 Mode D'emploi page 22

To listen to or change a station, select Menu > Station List and press OK knob. Scroll knob
control to select station you want to listen to. Stations listed with a '?' question mark in front
of them are not available. Once selected, the station plays and the screen shows 'playing'
information about the station, track or show broadcast by the station. Alternatively, pressing
either the left and right keys, jumps to the next station up or down in the station list. Preset
stations can be stored and recalled as described in Section 4.5 presets.
Now playing information
While the stream is playing, the screen shows its name and DLS (Dynamic Label segment)
information broadcast by the station giving real-time information such as programme name,
track title and contact details. Stereo broadcasts are indicated with an icon at the top of the
screen. To view further information, press Info. Each time you press Info, another set of
information is displayed, cycling through DLS text, programe type, ensemble name/frequency,
signal strength/error rate, bit rate/codec/channels, today's date and DL Plus (if available).
Slideshow
When slideshow is available (dependent on the broadcasted signal), the images are
displayed on the left side of the screen. To cycle through the different display options
(thumbnail, slide with DLS text and full screen slide) press the knob control.
Settings
Dynamic range compression (DRC)
Some DAB broadcasts offer dynamic range compression (DRC). This feature allows radios to
compress the dynamic range of the output audio stream, so that the volume of quite sounds
is increased, and the volume of loud sounds is reduced. This can be useful if you are listening
to music with a high dynamic range in a noisy environment (for example, classical music
while cooking). To change the DRC setting for radio, select Menu > DRC, and then DRC high,
DRC low or DRC off.
Note: Radio DRC setting does not have any effect if DRC data is not included in the
broadcast.
Station order
You can choose the order of DAB station list to be either Alphanumeric, Ensemble or Valid,
Ensemble lists groups of stations that are broadcast together on the same ensemble, for
example BBC or South Wales local. Valid lists valid stations first, alphanumerically, then
off-air stations. To change station order, select Menu > Station order > then Alphanumeric,
Ensemble or Valid.
Station storing or preset:
While a station is playing, press and hold the 'PRESET' button on the unit or press and hold
the preset button on the remote control
The following screen will appear.
22