Connecting The Pumpset - Ardo alyssa Mode D'emploi

en
4.2 Start-up
WARNING: Risk due to contamination / infection
To prevent contamination of your breast milk, thoroughly wash your hands with soap and water before each use.
You can operate the Ardo Alyssa with either the USB cable that is included or the integrated rechargeable battery.
Mains operation
Push the flap a backwards, insert the USB cable b into the USB port on the
breastpump and connect the power adapter to the mains power supply.
Battery operation
It is not necessary to fully charge the rechargeable battery before the first use. You can connect Ardo Alyssa with the USB
power adapter and charge the rechargeable battery during the first five hours of use at the same time (see Section 5).
4.3 Operation with a smartphone
The MyArdo app allows you to operate the Ardo Alyssa breastpump and to automatically save your expressing data.
Using the Memory Plus function, personal expression histories can be saved and accessed at any time using the MyArdo app.
Installing the MyArdo app
1. Download the MyArdo app free of charge from the App Store or Google Play on your mobile device and install it.
MyArdo app is available for both iOS and Android operating systems.
2. Open the MyArdo app on your mobile device and confirm the query about the instructions for use.
Connect to the Ardo Alyssa breastpump
1. Ensure that Bluetooth is activated on your mobile device.
2. Switch the breastpump on.
3. The serial number or code requested on the screen is located on the bottom of the Ardo Alyssa.
4. When the breastpump is connected with Bluetooth, the corresponding symbol lights up
5. Follow the instructions on the screen.
4.4 Preparing the Ardo Alyssa breastpump

4.4.1 Connecting the pumpset

Single pumping
Attach the tube connec-
tor to the Ardo Alyssa.
The second opening of
the tube connector stays
closed.
The use of the pumpset is described in the enclosed instructions for use for the 'Pumpset and accessories'.
4
Double pumping
Open the second opening
of the tube connector and
connect the tube of the
second pumpset. Connect
the tube connector to the
Ardo Alyssa.
b
a
.